Stopping, Parking - Husqvarna FC 250 Heritage 2023 Owner's Manual

Warning
Danger of accidents Moisture and dirt impair the brake system.
–
Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.
–
On sandy, wet, or slippery surfaces, use mostly the rear brake.
–
Always finish braking before you go into a bend. Shift down to a lower gear appropriate to your speed.
–
Use the braking effect of the engine on long downhill stretches. Shift back one or two gears, but do not
overrev the engine when doing so. This means that significantly less braking is required and the brake sys-
tem does not overheat.
8.10

Stopping, parking

Warning
Risk of injury People who act without authorization may not be familiar with the vehicle.
–
Do not leave the vehicle unattended if the engine is running.
–
Protect the vehicle against access by unauthorized persons.
Warning
Danger of burns Some vehicle components become hot when the vehicle is operated.
–
Do not touch any parts such as the exhaust system, radiator, engine, damper, or brake system
before the vehicle parts have cooled down.
–
Let the vehicle parts cool down before you perform any work on the vehicle.
Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
–
Do not park the vehicle near to materials which are highly flammable or explosive.
–
Allow the vehicle to cool down before covering it.
–
Apply the brakes on the motorcycle.
–
Shift the transmission to the neutral position.
–
Press and hold the stop button
–
Park the motorcycle on firm ground.
while the engine is idling until the engine stops.
RIDING INSTRUCTIONS 8
31