Activating Traction Control; Starting Off - Husqvarna FC 250 Heritage 2023 Owner's Manual

Table of Contents

Advertisement

8 RIDING INSTRUCTIONS
8.4
8.5
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle
carefully.
28

Activating traction control

Info
The traction control reduces excessive slip on the rear wheel in favor of more control and propulsion,
particularly in wet conditions.
When traction control is switched off, the rear wheel may spin more during high acceleration and on sur-
faces with low grip.
Traction control can be switched on or off during the ride.
The setting most recently selected is activated again when restarting.
F03760-11

Starting off

Info
The launch control is deactivated automatically for a
few seconds after the vehicle has started.
Launch control is also deactivated in the following
cases: if the throttle valve is closed more than 1/3 of
the way after full throttle, and/or if there is no start
within 3 minutes.
For safety reasons, the engine must be switched off
for at least 10 seconds before the launch control can
be activated again, regardless of whether the vehicle
has been started or not.
If the engine has already been running for some time,
the engine must first be restarted before the launch
control can be activated.
1
Press the TC button
Guideline
Engine speed
The TC indicator lamp lights up when traction control is
activated.
to switch traction control on or off.
≤ 4,000 rpm

Advertisement

Table of Contents
loading

Table of Contents