Editing List Elements - TI -82 Manual Book

Editing List Elements

In the editing context, an edit cursor is active on the bottom line, and you can
change the value of the current list element. You can also move onto the list
name and edit the entire list at once.
Editing Context Keys
| or ~
'
Any entry
character
y [
]
INS
{
Í
† or }
Editing a List Element
1. Move the rectangular cursor to the element you want to change.
2. Switch to editing context.
Press Í to change the value by inserting, deleting, or typing over
¦
digits.
Press ' to clear the entire value so you can enter a new value.
¦
Note: You can press ', followed by Í to restore the value
at the rectangular cursor if you make a mistake.
¦
Press an entry key, such as a number or letter, to begin an entry. This
automatically clears the value.
3. Enter the value. You may enter an expression (which is evaluated when
you leave editing context).
4. Press Í, }, or † to move to another element.
Statistics 12-11
Moves the edit cursor within the value.
Clears the value on the bottom line.
Copies the character to the location of the edit cursor
on the bottom line. If it is the first character typed, the
value on the bottom line is cleared.
Activates insert cursor.
Deletes character.
Stores the value on the bottom line to the list element;
switches to viewing context. Rectangular cursor moves
to the next element.
Stores the value on the bottom line to the list element;
switches to viewing context and moves the rectangular
cursor within the column.