Error Conditions - Texas Instruments TI-80 Manual Book

Error Conditions

When the TI.80 detects an error, it displays ERR: message and the error menu.
The general procedure for correcting errors is described on
page 1.22. The error messages, their possible causes, and suggestions for
correction are shown below.
ARGUMENT
BREAK
DATA TYPE
DIM MISMATCH
DOMAIN
A function or instruction does not have the correct number of
arguments. See Appendix A and the appropriate chapter.
You have pressed the ´ key to break execution of a program,
halt a Draw instruction, or stop evaluation of an expression.
You have entered a value or variable that is the wrong data
type.
¦
A function (including implied multiplication) or an
instruction has an argument that is an invalid data type; for
example, a list where a real number is required. See
Appendix A and the appropriate chapter.
¦
You are attempting to store to an incorrect data type; for
example, a list to a real variable.
¦
In function graphing or parametric graphing, you have
generated a list result rather than a single value; for
example, attempting to graph
You are attempting to perform an operation that uses more
than one list, but the dimensions do not match.
Typically, this occurs when the value of an argument does not
fall within a specified range.
¦
You are attempting to divide by zero.
¦
You are attempting a logarithmic or power regression with
LX
a or an exponential or power regression with
LY
a .
¦
A zero value for for
This error does not occur during graphing because the
TI-80 allows for undefined values on a graph.
Service and Warranty Information B-11
Yã={1,2,3} X
NDERIV( will result in this error.
.