Stored Operations - Texas Instruments TI-34 II Explorer Plus User Manual

`

Stored Operations

Keys
These numbered paragraphs provide
explanations for the corresponding numbered
keys on the illustration below.
1. % n or %p let you store an
operation.
2. m or o recalls and displays the
stored operation on the entry line.
© 1999 T I
EXAS NSTRUMENTS
1
2
I
NCORPORATED
Notes
The examples on the transparency
masters assume all default settings.
The TI-34 Û stores two operations,
and . To store an operation to
OP2
and recall it:
OP2
1. Press % n or % p.
2. Enter the operation (any
combination of numbers,
operators, or menu items and
their arguments).
3. Press < to save the operation
to memory.
4. m or o recalls and displays
the operation on the entry line.
The TI-34 Û automatically
calculates the result and displays
the counter on the left side of the
result line. (You do not have to
press <.)
You can set the TI-34 Û to
display only the counter and the
result (excluding the entry). Press
% n or % p, press !
until the = is highlighted (Ù).
Repeat to toggle this setting off.
TI-34 Û: A Guide for Teachers
5
OP1
or
OP1
51