Remote Control (Wi-Fi) - Hoover H Series Manual

16. REMOTE CONTROL (WI-FI)

This appliance is equipped with Wi-Fi
technology that allows the machine to be
remote controlled via an app.
Pairing the machine with the app
Download the Hoover Wizard app onto

your device.
The Hoover Wizard app is available
both for Android and for iOS tablets
and smartphones.
To discover all the details of the Wi-Fi
features, explore the app menus in
DEMO mode.
 Make sure the router is turned on and
your smartphone/tablet is connected to
your home Wi Fi network.
BLUETOOTH
Turn on

smartphone/tablet (if available).
Open the app, create a user profile and

enroll the appliance,
instructions appearing on the device's
display.
Turn on the dishwasher by pressing the

ON/OFF button for 3 seconds when
instructed to do so in the app.
Press "PROGRAMME

button/ENROLMENT Wi-Fi" for 3 secs
 the message "ENROLMENT" will
scroll on the display and the "Wi-Fi"
indicator light will be off.
Within 60 secs. keep the "DELAY START"

button pressed for 3 secs., and the
message "EASY" will appear on the
display for 5 mins, the Wi-Fi indicator light
will start to flash slowly 3 times and then
turn off for 2 seconds.
Enter the password of your home WiFi

network in the App and complete the
procedure.
Successful enrollment
The message "CONNECTED" will appear

on the display once, after which the message
"REMOTE CONTROL" will appear and
the "Wi-Fi" indicator light will be steady on.
You can now check the machine from the

App.
Unsuccessful enrollment
If enrolment fails (or does not succeed
within 5 mins.):
"TRY AGAIN" will appear on the display.

The machine will not be connected.

Repeat the enrolment procedure from the

App.
For
"Enrollment App - Quick Guide" that
comes with your machine, also accessible at
the link: go.candy-group.com/am-dw
on your
Reset WiFi
Repeat the enrolment procedure, removing
the product from the APP, in the event of
following the
problems or a change in your home router
password.
ENABLING REMOTE CONTROL
Whenever you want to use the machine
SELECTION
with remote control:
Fill the dishwasher, add detergent.

Turn on the dishwasher.

Press

button/ENROLMENT Wi-Fi" for 3 secs.
 The message "REMOTE CONTROL"
will appear on the display.
 Close the door.
You can now check the machine from the

App.
105
more information,
"PROGRAMME
refer to the
SELECTION