Table of Contents
Advertisement
Certain problems are due to lack of simple maintenance or oversights, which can
be solved easily without calling out an engineer.
Before contacting your local Service Centre,please carry out the checks listed
below.
Once the problem has been eliminated, press the Start/Pause button to restart the
program.
If after all checks, the problem persists, contact your local Service Centre.
PROBLEMS
Machine pauses during washing or rinsing
Water flowing in during washing or rinsing
Machine pause after water is fully drained
Spinning of the drum is intermittent or paused
during the initial spin cycle
Machine adds water into the drum during
spinning cycle
The control panel feels warm
The machines does not continue after power
supply recovers from sudden supply cut-off
Machine does not respond when buttons are
pressed
Some detergent residue in the detergent
drawer
Technical Information
Model
Product Dimension (WxHxD) mm
Power supply : THAI
Rated Power
Water supply pressure (min-max) Mpa
Maxium load
Spin speed
POSSIBLE REASONS AND RELEVANT
SOLUTION
Machine is detecting water level which is normal operation.
The machine detects water level lower than required and
automatically top up water.
Spin cycle is delayed to ensure complete water drain which is
normal operation.
The machine program is designed with initial intermittent
spinning which is normal operation.
The washing load is unevenly distributed and machine is
redistributing the load.
This is normal as some electrial components generate heat
There has been continuous power supply cut-off and machine
goes into power off for protection purpose.
Child Lock option is activated. Unlock Child Lock to resume
normal operation of the control buttons.
Check the water supply pressure. The suitable water supply
pressure is 0.03-0.6MPa.
EWT1575D2SA
650x1040x670
220V~,50Hz
0.03-0.6MPa
14
400W
15kg
600 rpm
Advertisement
Table of Contents
