Connection­and­preparation; Connecting The Antenna And The Power Adapter - Grundig 40 VLE 4520 BM User Instructions

CONNECTION­AND­PREPARATION
Connecting­the­antenna­and­the­power­adapter
3
1a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the an-
tenna socket »ANT­IN« on the television set;
or
1b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket
t elevision set;
or
1c To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
tenna socket »ANT­IN« on the television set
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
­ 8
ENGLISH
2
IN« on the
»ANT­
­ - ----------------------------------------------
1
2 Plug the power cord of the power adapter
into a wall socket.
Notes:
Before pluging in the electrical cable make
7
sure that the adapter is connected to the tel-
evision.
Do not plug in the power adapter until you
7
have connected the external equipment and
the antenna.
Do not use an adapter plug or extension
7
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.