Table of Contents
Advertisement
4. GETTING STARTED WITH YOUR SUUNTO VYPER2
To get the most out of your Suunto Vyper2, take some time to personalize it and really
make it YOUR computer. Set the correct time and date, as well as the alarms and tones,
unit and backlight settings, then calibrate and test the compass function.
Suunto Vyper2 is a very user-friendly dive computer, and you will quickly become familiar
with its functions. Make absolutely sure that you know your computer and have it set up
as you want it BEFORE getting into the water.
4.1. TIME mode settings
The first thing you'll want to do with your Suunto Vyper2, is to set the TIME mode shortcuts:
alarm, time, date, units, backlight, and tones. In this section, we look at how to do this.
NOTE
Now that you know how to toggle between the shortcuts, you can start to set them. The
following figure shows how to enter the TIME SETTINGS menu.
4.1.1. Setting the alarm
The dive computer has a daily alarm function. When the daily alarm activates, the screen
blinks and the alarm sounds for 24 seconds. Press any button to stop the alarm.
4.1.2. Setting the time
In the TIME SETTING mode, you are able to set the hour, minute, and second, as well as
choose between 12 and 24 hour display.
4.1.3. Setting the date
Use the DATE SETTING mode to set the year, month, and day. The day of the week is
automatically calculated in accordance with the date.
The display is illuminated by holding down the MODE button for more
than 2 seconds.
USE UP AND DOWN BUTTONS TO TOGGLE BETWEEN ALARM, TIME,
DATE, UNITS, BACKLIGHT AND TONES.
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
11
Advertisement
Table of Contents
