Assembly - Husky HOTC4116B23S Use And Care Manual

Assembly

1
Attaching the side handle
□ Attach the side handle (D) to the rolling cabinet (E)
using four bolts (BB).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Placing the chest
NOTE: Two people may be required to complete
this step.
□ Place the top chest (B) on top of the rolling cabinet (E).
D
E
B
E
2
Installing the casters
□
Ensure all cabinet drawers are securely locked into
place using the key lock on the rolling cabinet (E).
□ Lay the rolling cabinet (E) on its back. Use the
packaging material to protect the finish.
□ Mount the two swivel casters with brake (F) to the
rolling cabinet (E) using four bolts (CC) per caster.
T he s wivel casters with brake (F) should be installed on
the same side as the side handle (D).
□ Mount the two regular casters (H) to the other side of
the rolling cabinet (E) using four bolts (CC) per caster.
□ Tighten all bolts with a wrench.
□ Return the rolling cabinet (E) to its upright position.
BB
CC
4
Installing the brackets
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the brackets (C) to the back of the product to secure
the top chest (B) to the rolling cabinet (E). Place the
brackets over the holes and secure with four screws (AA)
per bracket.
□ Tighten all screws securely with a screwdriver.
C
AA
6
CAUTION: Do not over tighten the screws.
H
F
□
E
B
E