Cadillac Escalade ESV 2014 Owner's Manual page 261

Traffic: Press to enable or disable
the traffic function.
Show Traffic ICONS: Press to
display traffic icons on the map
screen. This function allows which
traffic information displays.
Traffic Flow Status This screen
button is used to enable or disable
the green, yellow, red and orange
arrows shown beside the roads and
used to show the traffic flow or
extent of a traffic event.
Black indicates a closed road
segment
Red indicates significantly
impaired traffic flow with average
speed of fewer than 40 km/h
(25 mph).
Yellow indicates slightly impaired
traffic flow with average speed
between 40 km/h (25 mph) and
72 km/h (45 mph).
Green indicates normal traffic
flow with average speed above
72 km/h (45 mph).
Orange indicates construction.
Traffic flow data arrows display on
the map when scaled up to
eight miles.
Closed Road, Traffic Delays,
Incidents, and Advisories
four screen buttons are used to
select the traffic event ICONS that
appear on the map screens.
Infotainment System
Alert for Approaching Traffic
Events: When On, if an
approaching traffic event is within
the alert range, one of two traffic
alert pop-up screens display:
With no route planned, while on
expressways, Approaching
Traffic Event without Avoid
screen displays.
With route planned, Traffic Event
on Route screen displays.
If the Alert for Approaching Traffic
Events is Off, the alert pop-up
screen does not display.
On-Route
Select the On Route screen button
These
to display all events ahead on the
current active route. If no traffic
events have been reported on route,
No Traffic Events Reported On
route displays.
7-89