Removing the Door Glass
The glass can be removed from the Grill door for cleaning.
• Ensure the door glass has cooled down.
•
1. Open the door slightly.
•
2. The grill door has a vent at the top that can be removed. Press
the clips on either side of the vent and gently remove the vent.
Be careful the grill door doesn't spring closed.
3. Remove the glass, taking care not to knock or damage it. This
can now be cleaned.
4. The glass has a coating which reflects heat back into the cavity
so it's important that when replacing the glass you make sure
it's the correct way around. Make sure you can see words
'THERMAL REFLECTOR' when the door is open.
Replacing the Oven Lamps
Let the oven cavity cool down.
Remove the protective cover by turning anti-clockwise
•
Remove the lamp and replace with a new one suitable for high temperatures
•
(300°C).
•
Refit the protective cover.
Lamp specifications
Voltage: 220 - 240V
Wattage: 15W
Installation
•
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room in accordance with the latest
•
editions of BS6172, BS5440-2 and BS6891, but not in a room containing a bath or shower. Please refer to the
local legislation/regulations to ensure location is permitted.
If the cooker is installed adjacent to furniture which is higher than the gas hob, a gap of at least 65 mm must be
•
left between the side of the cooker and the furniture unless non-combustible materials (ceramic tiles, metal
backsplash etc.) are used, then no gap is necessary.
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the
•
adjustment of the appliance are compatible. The adjustment conditions for this appliance are stated on the
label (or data plate).
INSTRUCTION
MANUAL
31