Kia Cerato 2009 Service Manual page 96

4. Install the crankshaft main bearings.
Upper 1, 2, 4, 5 bearings have an oil groove of oil holes ; Lower bearings do not.
(1) Align the bearing claw with the claw groove of the cylinder block, push in the 5 upper bearings(A).
(2) Align the bearing claw with the claw groove of the main bearing cap, and push in the 5 lower bearings.
5. Install the oil jet.
Tightening torque :
8.8 ~ 12.7N.m (0.9 ~ 1.3kgf.m, 6.5 ~ 9.4lbf.ft)