LG LGD800.AATTBK User Manual page 12

Table of Contents

Advertisement

Important notice
9. If the screen freezes
If the phone does not respond to user
input or the screen freezes:
Press and hold the Power/Lock Button
for 10 seconds to reboot it.
10. Do not connect your phone
when you power on/off
your PC
Make sure to disconnect your phone from the
PC when powering your PC on or off as it might
result in PC errors.
11. Hardware key control
mode
If your phone display is damaged or broken,
you can answer an incoming call, end a call, or
turn off an alarm using the hardware keys.
1
Turn your phone off.
2
Press and hold the Power/Lock Button
and the Volume Buttons
the same time for more than 6 seconds to
enter the Hardware key control mode.
3
Press the Volume Buttons
scroll to the desired option, then press the
Power/Lock Button
12
X
at
to
to confirm.
Answer a call: Press the Volume
Buttons at the same time.
End a call: Press the Power/Lock
Button during a call.
Emergency call: Turn the screen on and
press VOLUME UP and DOWN buttons at
the same time.
Stop an alarm: When an alarm rings,
press and hold the Volume Up Button or
Volume Down Button to stop the alarm.
NOTE
If you use your phone with a broken display
glass, your phone can break even more or
you can be injured. Make sure to visit the
LG authorized service center to get your
phone repaired.

Advertisement

Table of Contents
loading

This manual is also suitable for:

G2

Table of Contents