Using The Automatic Ice-Maker - Hotpoint MSZ 900 DF (UK) User Manual

Table of Contents

Advertisement

Using the automatic
All manuals and user guides at all-guides.com
ice-maker
GB
After switching on the refrigerator, it usually takes
overnight for the first ice cubes to form.
When selecting crushed ice, the cubes are crushed
just before being dispensed, therefore the crushed ice
may come out with a slight delay. Noise from the ice
crusher is normal, and pieces of ice may vary in size.
When changing from crushed ice to ice cubes, a small
amount of crushed ice may come out together with the
first cubes.
Normal ice production consists of about 7 to 8 batches
of ice cubes in a 24-hour period. The quantity and size
of the ice cubes depend on the mains water pressure.
Ice cubes production can be increased by decreasing
Note: Large amounts of ice cubes should be taken
the temperature on the freezer compartment.
directly from the bucket, and not from the dispenser.
NOTE: In order to increase the amount of available
space, the ice drawer can be remover from the
freezer compartment. In this case, remember to
switch the ice maker off, or ice production will
continue.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msz 902 df (uk)Msz 906 df (uk)

Table of Contents