Honda CRF250F 2023 Owner's Manual page 92

1. Pull the rubber dust cover (1) back.
2. Loosen the lock nut (2).
3. To position the front brake lever (3) farther
away from the handgrip, turn the adjuster (4)
clockwise.
To position the front brake lever closer to the
handgrip, turn the adjuster counterclockwise.
4. Tighten the lock nut. Return the dust cover to
its normal position.
5. Apply the brake, release it, then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
Fluid Level Inspection
Front Brake Fluid Level
RIGHT
HANDLEBAR
(1)
(1) LWR mark
With the motorcycle in an upright position,
check the fluid level.
It should be above the LWR mark (1). If the
level is at or below the LWR mark, check the
brake pads for wear (page 85).
Brakes
Servicing Your Honda
83