Chapter 1: Introduction; Overview - Supero 7043M-6 User Manual

Supermicro superserver 7043m-6 servers: user guide
Table of Contents

Advertisement

1-1

Overview

The Supermicro SuperServer 7043M-8/7043M-6 is a high-end dual processor
server that can be utilized either in a tower or in a rackmount configuration. The
SuperServer 7043M-8/7043M-6 is comprised of two main subsystems: the
SC742S-450 high-end server chassis and the X5DMS-8GM/X5DMS-6GM dual
Xeon processor mainboard. Please refer to our web site for information on
operating systems that have been certified for use with the SuperServer 7043M-
8/7043M-6.
In addition to the mainboard and chassis, various hardware components have
been included with the SuperServer 7043M-8/7043M-6, as listed below:
!
Up to two (2) 604-pin Intel Xeon processors (optional)
!
Two (2) CPU heatsinks (FAN-042-CF)
!
Two (2) heatsink retention clip assemblies (SKT-095-604E)
!
Up to 12 GB ECC registered DDR266 SDRAM main memory (optional)
!
One (1) 3.5" floppy drive
!
Three (3) 5.25" drive bays
!
One (1) ribbon cable for IDE CD-ROM
!
One (1) ATA100 ribbon cable for IDE hard drives
!
One (1) USB cable for front side access
!
One (1) single channel SCA SCSI backplane
!
Seven (7) SCA 1-inch high SCSI drive carriers
Chapter 1
Introduction
1-1

Chapter 1: Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

7043m-8Superserver 7043m-6Superserver 7043m-8

Table of Contents