Procure Tools And Equipment; Rack Mount And Accessory Kits - Cisco Nexus 9804 NX-OS Hardware Installation Manual

Prepare for Installation
• Each port must match the wave-length specifications on each end of the cable, and the cable must not
Note

Procure Tools and Equipment

Obtain these necessary tools and equipment for installing the chassis:
• Number 1 and number 2 Phillips screwdrivers with torque capability to rack-mount the chassis.
• 3/16-inch flat-blade screwdriver.
• Tape measure and level.
• ESD wrist strap or other grounding device.
• Antistatic mat or antistatic foam.
• Two-hole ground lug (1).
• A crimping tool specified by the lug manufacturer that is large enough to accommodate the girth of the
• Wire-stripping tool.

Rack Mount and Accessory Kits

Accessory Kit
Accessory kit (N9K-C9800-IN-KIT) includes the following:
Table 6: Accessory Kit
Illustration
exceed the stipulated cable length.
Cisco 9800 Series switches function in operating temperatures of up to 40°C at sea level. For every 300 meters
(1000 ft) elevation upto 1800 meters (6000 ft), the maximum temperature is reduced by 1°C. For more details
on environmental requirements, see
lug.
Cisco Nexus 9800 Series Switches Data
Description
Rack mount kit (N9K-C9800-AR-KIT):
• Support rails are non-adjustable
• Set the vertical support rack rails at 32"
pitch
Cisco Nexus 9804 NX-OS Mode Switch Hardware Installation Guide
Procure Tools and Equipment
Sheet.
Quantity
1
11