Solid-State Drive And M.2 Solid-State Drive Bracket (For Intel Models Only) - Lenovo 21BT0012IX User Manual

For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 29.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 30.
Removal procedure
Installation procedure
Note: For T14 Gen 3 Intel models, memory module replacement might cause memory retraining. For details,
see "Detect memory retraining" on page 28.
M.2 solid-state drive and M.2 solid-state drive bracket (for Intel models
only)
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
40
T14 Gen 3/T16 Gen 1/P14s Gen 3/P16s Gen 1User Guide
and print the following instructions.