Philips Sonicare DiamondClean Smart HX992W User Manual page 20

22
English
Cleaning
Toothbrush handle
Brush head
Charger and travel case
Glass and brush head holder
Note: Do not clean the brush head, handle or
travel case in the dishwasher.
1 Remove the brush head and rinse the metal
shaft area with warm water. Make sure you
remove any residual toothpaste.
Caution: Do not push on the rubber seal on the
metal shaft with sharp objects, as this may
cause damage.
2 Wipe the entire surface of the handle with a
damp cloth.
Note: Do not use isopropyl rubbing alcohol,
vinegar or bleach to clean handle as this may
cause discoloration.
1 Rinse the brush head and bristles after each
use.
2 Remove the brush head from the handle and
rinse the brush head connection with warm
water at least once a week.
1 Unplug the charger and travel case before you
clean it.
2 Use a damp cloth to wipe the surface of the
charger and travel case.
1 Clean the glass and the brush head holder with
water and some mild soap.
2 Dry them with a soft towel.
The glass and the brush head holder are
dishwasher-safe.