Table of Contents
Advertisement
ƒ Smart Fan 5
& Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
& Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Allows the fan to run at different speeds according to the temperature. You can adjust the fan
Normal
speed with System Information Viewer based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed in the curve graph.
Manual
Full Speed
Allows the fan to run at full speeds.
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control.
& Temperature Interval
Allows you to select the temperature interval for fan speed change.
& Fan/Pump Control Mode
Lets the BIOS automatically detect the type of fan installed and sets the optimal control
Auto
mode. (Default)
Voltage mode is recommended for a 3-pin fan/pump.
Voltage
PWM mode is recommended for a 4-pin fan/pump.
PWM
& Fan/Pump Stop
Enables or disables the fan/pump stop function. You can set the temperature limit using the temperature
curve. The fan or pump stops operation when the temperature is lower than the limit. (Default: Disabled)
& Temperature
Displays the current temperature of the selected target area.
& Fan Speed
Displays current fan/pump speeds.
& Flow Rate
Displays the flow rate of your water cooling system.
& Temperature Warning Control
Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
& Fan/Pump Fail Warning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump
condition or fan/pump connection when this occurs. (Default: Disabled)
C/140
F, 70
C/158
F, 80
C/176
o
o
o
o
o
- 57 -
F, 90
C/194
F.
o
o
o
BIOS Setup
Advertisement
Table of Contents
Troubleshooting
