Table of Contents
Advertisement
Chapter 2 Installation
2.1
Package Contents
Make sure that the package contains the following items. Please
contact your distributor, if any of the listed items is damaged or missing.
The figures are for demonstration only. The actual items may differ in
appearance and quantity from the depicted.
NVR
Installation Guide
2.2
Safety Precautions
To avoid any device damage and bodily injury caused by improper use,
you should observe the following rules.
Safety Precautions
■
Keep the power off during the installation.
■
Wear an ESD-preventive wrist strap, and make sure that the wrist strap
■
has a good skin contact and is well grounded.
Use only the power cord provided with the device.
■
Make sure that the supply voltage matches the specifications indicated
■
on the rear panel of the device.
Ensure that the device is installed in a well-ventilated environment and
■
its ventilation hole is not blocked.
Do not open or remove the cover of the device.
■
Before cleaning the device, cut off the power supply. Do not clean it by
■
the waterish cloth, and never use any other liquid cleaning method.
Power Cord, HDD Power
Cables, HDD Data Cables
Mounting Brackets, Screws
and Rubber Feet
7
Mouse
Advertisement
Table of Contents
