Tools, Supplies, And Required Equipment - Traxxas 1/16 E REVO VXL BRUSHLESS Owner's Manual

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate and
maintain your model.
Supplied Tools and Equipment
1.5mm "L" wrench 2.0mm "T" wrench
6-cell 2/3A iD NiMH battery* NiMH battery charger with iD*
*Battery and charger style are subject to change and may vary from images.
APPLYING THE DECALS
The main decals for your model have been applied at the
factory. Additional decals are printed on self-adhesive clear
mylar and are die-cut for easy removal. Use a hobby knife
to lift the corner of a decal and lift it from the backing. To
apply the decals, place one end down, hold the other end
up, and gradually smooth the decal down with your finger
as you go. This will prevent air bubbles. Placing both ends
of the decal down and then trying to smooth it out will
result in air pockets.
Look at the photos on the box for typical decal placement.
2.5mm "L" wrench 4-way wrench
Required Equipment
Body clips 4 AA alkaline
batteries
For more information on
batteries, see Use the Right
Batteries on page 13.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
Optional pinion gear
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
• Hobby knife
• Side cutters and/or needle
• Phillips screwdriver
• Soldering iron
USB-C power adapter
and cable
1/16 E-REVO VXL • 7
Glue, Part #6468 (CA glue)
nose pliers
9 9