Wireless Mouse Functions; Functions And Operations - Sharp PG-D120U Operation Manual

Wireless Mouse Functions

By attaching the provided mouse cable to both the mouse terminal on your projector and the mouse terminal on
your personal computer, you can use the wireless mouse built into the remote control, instead of the mouse
equipped with your personal computer, to operate your personal computer. The wireless mouse functions will work
with personal computers compatible with IBM PS/2, serial (RS-232C) or Apple ADB type mouse systems.
Connection Example
Personal computer

Functions and Operations

POWER ON/OFF
button
MOUSE/ADJUSTMENT
sliding switch
First, connect the units as shown above, and turn the projector power on.
Second, turn the computer power on.
Next, slide the main power switch on the side of the remote control.
When using the remote control as a wireless mouse, move the MOUSE/ADJUSTMENT sliding switch to the
MOUSE position.
Notes:
In some situations the wireless mouse may be inoperable if your computer port is not correctly set-up. Please refer to your
computer owners manual for details on setting-up/installing the correct Mouse Driver.
Do not connect or remove the mouse control cable to/from your computer while it is on. This may damage your computer.
Do not connect the mouse input terminal for IBM/MAC and the mouse input terminal for PC98 simultaneously.
MOUSE buttons
By lightly pressing the up/down and right/left arrow buttons located on the front of
the remote control, you can move the mouse cursor on your monitor screen.
Note:
The amount of presssure applied to the mouse button determines the speed the mouse cursor travels.
Pressing lightly on the periphery of the mouse button makes the mouse cursor move slowly. Pressing hard makes it move quickly.
LEFT-CLICK button
RIGHT-CLICK button
LASER POINTER button
"COMPLIES WITH 21 CFR SUBCHAPTER J"
CAUTION
SHARP ELECTRONICS CORPORATION
SHARP PLAZA, MAHWAH, NEW JERSEY 07430
TEL : 1-800-BE-SHARP
LASER RADIATION-
DO NOT STARE INTO BEAM
REMOTE CONTROL
MODEL NO. : RRMCG1327CESA
WAVE LENGTH : 670nm
DC6V (1.5VX4PCS.)
MAX. OUTPUT : 1mW
MADE IN JAPAN
CLASS II LASER PRODUCT FABRIQUÉ AU JAPON
E-8
To mouse terminal
Provided mouse cable (for IBM PS/2, serial and Apple ADB type mouse)
ON VOL
MUTE
OFF
LASER POINTER button
E-ZOOM LASER/
MENU
E-Z
MN
MOUSE button
RIGHT-CLICK button
R-CLICK/ENTER
INPUT SELECT
VIDEO DATA
MOUSE ADJ.
LIGHT
LCD PROJECTOR
The LEFT-CLICK button on the back of the remote control corresponds to the left button of
the mouse on two-button mouse systems.
The RIGHT-CLICK button on the front of the remote control corresponds to the right button
on two-button mouse systems.
Note:
For one-button mouse systems use either the LEFT-CLICK or RIGHT-CLICK button.
Press the LASER POINTER button to activate the laser pointer.
When the button is pressed, the light stays on; when the button is released, the light goes off.
However, even when the button is pressed continuously, the light automatically goes off 1
minute after it goes on. To turn it on again press the laser pointer button one more time.
U.S.A. ONLY
Projector
OFF
PC CONTROL MOUSE FOR PC98
WIRED
REMOTE
VIDEO IN AUDIO IN
S-VIDEO
IN COMPUTER RGB OUT AUDIO OUT
COMPUTER
VIDEO L R AUDIO IN
L R
The laser pointer on the remote control emits a
laser beam from the laser light window. The laser
emitted is a class II laser; therefore, do not look
into the laser window or shine the laser beam on
yourself or other people. The two marks to the left
are the caution labels for the laser beam.
Always use the laser pointer at temperatures
between 41 F to 104 F (5 C to 40 C).
ON
Main power switch of
REMOTE CONTROL
LEFT-CLICK button
Mouse cursor