Sharp DK-CL6N Operation Manual page 12

Alarm and sleep operation (continued)
■ Activate and deactivate the alarm
1 Press an ALARM 1 or ALARM 2 button to preview current alarm
times and source.
2 Within 2 seconds, press again to activate or deactivate the alarm
function. 1 beep sound will indicate the alarm is activated or
deactivated. When activate the alarm setting time, wake up
source and alarm icon (
Daily Alarm:
● During alarm is function, press ALARM RESET button to stop
alarm and it will come again on the next day.
Sure Alarm:
● When power failure, the buzzer alarm will function if the backup
batteries are installed.
■ Snooze function
Once alarm has started, pressing the SNOOZE/DIMMER button will
stop alarm for 9 minutes.
Once the snooze time has expired, alarm will continue.
The snooze function can be operated during 1 hour alarm cycle.
■ Sleep operation
The radio and iPod can be turned off automatically.
1 Playback the desired sound source.
2 Press the SLEEP button on the main unit or remote control
(DK-CL6N only) to select sleep time.
3 After 10 seconds the display will return to previous mode
and sleep indicator appears.
1 or 2) appear on display.
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the SLEEP button once
to select "SLEEP XXX".
"XXX" is sleep remaining time.
● The remaining sleep time is displayed for about 10 seconds.
● You can change the remaining sleep time while it is
displayed by pressing the SLEEP button (step 2).
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the SLEEP button to
select "SLEEP OFF".
■ To use alarm and sleep operation together
Sleep and alarm:
For example, you can fall asleep listening to the radio and wake up
to iPod in the next morning.
1 Set the sleep time (see left, steps 1 - 4).
2 While the sleep timer is set, set the alarm (steps 1 - 4, page
11).
3 Activate the alarm (page 12).
Sleep timer setting
10 minutes - 2 hours
Sleep operation will
automatically stop
12
Alarm setting
1 hour
Alarm start time
End time