Hunter Barrel 51549 Instruction Manual page 3

We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you'll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
bag
For installing the hanger bracket and wiring the fan
Blade Nut
bag
x6
Blade
Blade Arm x6
Connector
For installing the blades
Spare Parts
bag
For your convenience,
you may receive extra fasteners.
Remove the
ORANGE shipping
ring from the motor.
Save the screws.
They will be needed
for blade iron
installation.
M3914-01 r111121
Here is what comes in your box:
Wood Screw
WIre Nut
Washer
x2 x4
x18
x18
Grommet
bag
x6
Blade Arm
bag
Pullchain and
extra downrod
IMPORTANT
Hunter Pro Tip:
x2
x18
Blade Screw
x8
Blade Arm Screw
Lower Switch Housing
Note:
Fan style may vary.
Find a part that is missing or damaged?
Don't take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Ceiling Bracket
Canopy
bag
For installing the canopy
Downrod
Motor
Upper Switch Housing
bag
Light Kit Screw
Switch Housing
Screw
1886
Canopy
Screw
x2
x3
x3
1.888.830.1326.
2