Fv1: V-Check Points Connectors - MSI Z170A XPOWER GAMING TITANIUM EDITION User Manual

FV1: V-Check Points Connectors

These voltage checkpoints are used to measure the current system voltages. A
multimeter (not included) will be required to check voltages.
To measure voltage, please use the optional voltage checkpoint cables included in the
motherboard package and follow the below steps:
1. Insert the cube end of the V-Check cables into the GND pin and the voltage pin
you want to measure.
2. Connect circular end of the V-Check cables to the test leads.
3. Measure voltage with your multimeter.
42
Overview of Components
1
1
9
GND
GND
GND
PCH
VCCIO
VCCSA
DDR
GPU
1
CPU
2
2
3