Table of Contents
Advertisement
Fault
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
Cause and troubleshooting
Close the door.
▶
Childproof lock is activated.
Deactivate childproof lock.
▶
→ "Deactivating the childproof lock", Page 35
is activated.
Finished in
Check whether Finished in
▶
→ "Buttons", Page 27
Laundry is caught in the door.
Remove any trapped laundry.
▶
– – – – is activated.
Continue the programme by selecting Spin
▶
and pressing Start/Reload
Empty
→ "Resuming the programme when the programme
status is Rinse Hold", Page 35
The temperature is too high.
Wait until the temperature has dropped.
▶
Cancel the programme.
▶
→ "Cancelling the programme", Page 34
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 28
Power failure.
Open the door using the emergency release.
▶
→ "Emergency release", Page 51
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
▶
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
▶
not kinked or trapped.
Drain pump is blocked.
→ "Cleaning the drain pump", Page 38
▶
– – – – is activated.
Continue the programme by selecting Spin
▶
and pressing Start/Reload
Empty
→ "Resuming the programme when the programme
status is Rinse Hold", Page 35
The water outlet hose is connected too high.
Install the water outlet hose at a maximum height of
▶
1 metre.
Troubleshooting en
is activated.
.
.
or
or
45
Advertisement
Table of Contents
