Table of Contents
Advertisement
en Installation and connection
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
the screws for the 4 transit bolts
using a WAF 13 wrench.
Remove the power cable from the
3.
holder.
14
Remove the 4 sleeves.
4.
all of
Put on the 4 cover caps.
5.
Push the 4 cover caps downwards.
6.
Note: To install the transport locks to
transport the appliance, perform
these steps again in the reverse or-
der.
Advertisement
Table of Contents
