Asus TUF GAMING Z790-PRO WIFI Manual page 27

11. Addressable Gen2 headers
The Addressable Gen2 headers allow you to connect individually addressable RGB
WS2812B LED strips or WS2812B based LED strips.
Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
• The Addressable Gen2 header supports WS2812B addressable RGB LED strips
(5V/Data/Ground), with a maximum power rating of 3A (5V), and the addressable
headers on this board can handle a combined maximum of 500 LEDs.
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the addressable RGB LED strip is
connected in the correct orientation, and the 5V connector is aligned with the 5V
header on the motherboard.
• The addressable RGB LED strip will only light up when the system is powered on.
Motherboard User Manual
ADD GEN2_1
ADD GEN2_2
ADD GEN2_3
1-15