Friedrich KCS12 Installation And Operation Manual page 37

J.3 Control Panel Operation
The TM Menu continued
Auto mode selected. See Figure J.3.16.
Set the cool setpoint for your first timer period using the arrow buttons.
The cooling mode timer only sets the cool setpoint. See Figure J.3.17.
Next, set the heat setpoint for your first timer period. The heating mode
timer only sets the heat setpoint. See Figure J.3.18.
Figure
J.3.16
Figure
J.3.17
Figure
J.3.18
Figure
J.3.19
J. STARTUP AND OPERATION
Note: The auto mode timer sets both the cool and heat setpoint.
Set the time to start the first timer period. See Figure J.3.19.
MENU RETURN
MENU RETURN
MENU RETURN
MENU RETURN
37