Table of Contents
Advertisement
If you select OFF, the printer does not switch from telephone calling to fax reception automatically
even if the printer detects the fax signal (CNG signal). Select OFF if you want the printer not to
switch automatically during a call.
Note
• If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device
•
rings specified with Incoming ring in Fax only mode is available in Tel. priority mode.
If you want to specify the number of times the external device rings in Tel. priority mode,
select Fax only mode for Receive mode settings under Menu, specify the number of times the
external device rings with Incoming ring, then switch to Tel. priority mode for Receive mode
settings.
•
• If you subscribe to Duplex Ringing service in Hong Kong, we recommend that Manual/auto
switch be set to OFF.
Setting the DRPD Ring Pattern (US and Canada only)
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone
company, your telephone company will assign two or more telephone numbers with distinctive ring
patterns to your single telephone line, allowing you to have different numbers for fax calls and voice
calls using only one telephone line. Your printer will automatically monitor the ring pattern, and will
automatically receive the fax if the ring pattern is a fax call.
To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by
your telephone company.
Note
•
• Contact your local telephone company for detailed information on this service.
1.
1.
Check that printer is turned on.
2. Select Fax on the HOME screen.
2.
LCD and Operation Panel
3.
3. Select Menu.
The Fax menu screen is displayed.
4. Select Receive mode settings.
4.
5. Select DRPD.
5.
The confirmation screen asking whether to make advanced settings is displayed.
6. Select Yes.
6.
7. Select DRPD: Fax ring pat..
7.
373
Advertisement
Table of Contents
