Installation
• Mount the furniture door to the front of the
washer using the hinges. Place the spacers
under the hinges (I) and then fix in position
with screw (H).
We suggest mounting the furniture door so
that it opens towards the left, which is the
same direction as the porthole door. This
will leave more space when you are loading
washing into the appliance.
• Slide the washer into an opening of the size
indicated in the diagram opposite. A furniture
plinth may be run across the front of the
appliance, but its height will be dictated by the
height the washer is set at.
• The 4 adjustable feet allow the height of the
washer to be adjusted from 820 mm to a
maximum of 840 mm. To adjust the height, you
should remove the nuts fitted to each foot and
replace these with the 5 mm nuts supplied. Raise
the feet to your desired height and then fully
tighten the lock nut to the base of the washer.
28
Unit: mm