The Wireless Connection To A Network Does Not Work; Smartcard Reader Is Not Recognised; Smartcard Pin Forgotten; Smartcard Lost - Fujitsu LIFEBOOK E5413 Operating Manual

Troubleshooting and tips

The wireless connection to a network does not work

Thewireless connectiontoanetwork does notwork
Cause
The wireless component is disabled.
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

SmartCard reader is not recognised.

Cause
Chip card inserted incorrectly.

SmartCard PIN forgotten

Cause
PIN forgotten

SmartCard lost

Cause
SmartCard lost
72
Troubleshooting
► Switch the wireless component on (see
"Switching the wireless components on and
off", Page 44).
► Check whether the wireless connection is
switched on via the software.
► Further information on using the wireless
component can be found in the help files.
Troubleshooting
► Check if you inserted your SmartCard into
the SmartCard reader correctly.
► Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting
► If you are working in a network, contact your
system administrator, who can unlock your
notebook with a Supervisor PIN.
Troubleshooting
► If you are working in a network, contact your
system administrator, who can boot up your
notebook with a Supervisor SmartCard.
Fujitsu