Table of Contents
Advertisement
1.4
System memory
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5
(Double Data Rate 5) memory modules.The figure illustrates the location of the DDR5 DIMM
sockets:
A DDR5 memory module is notched differently from a DDR, DDR2, DDR3, or DDR4
module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module to the DDR5 slot.
•
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
•
You may install 8 GB, 16 GB, and 32 GB unbuffered and non-ECC DDR5 DIMMs into
the DIMM sockets.
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
•
For system stability, use a more efficient memory cooling system to support a full
memory load.
•
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
•
Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists), and memory
data rate depends on the CPU types.
Recommended memory configurations
DIMM_A2
Pro B760M-C
DIMM_A1
Channel
DIMM_A2
Channel A
DIMM_B1
Channel B
DIMM_B2
DIMM_A2
DIMM_B2
Sockets
DIMM_A1 & DIMM_A2
DIMM_B1 & DIMM_B2
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
1-11
Advertisement
Table of Contents
