Parts And Controls - Sony Walkman NWZ-B103F Operation Manual

Sony walkman nwz-b103f: operation guide
Hide thumbs Also See for Walkman NWZ-B103F:
Table of Contents

Advertisement

Parts and Controls

Front
Headphones
 REC/STOP button (  pages 33, 36)
Starts/stops recording. You can record the
sound from the microphone or the currently
received FM program.
 VOL +*
/– button
1
Adjusts the volume.
  /  (Power ON/OFF) button (  page 14)
Turns on/off the player.
 / button (  pages 11, 22)
Selects a song, album, artist, folder or menu
item. You can also skip to the beginning of
the song/album/artist/folder, fast-forward or
fast-rewind.
 *
button (  pages 11, 18)
1
Starts/pauses song playback or pauses/
restarts recording. When a menu appears
on the display, use this button to confirm
menu item.

 BACK/HOME*
button (  page 11)
2
Returns to the previous menu. Press and hold
this button to display the HOME menu.
 Display (  page 21)
 Microphone (  page 36)
  (Headphone) jack
When connecting the headphones, insert the
plug until it clicks into place. If connected
improperly, it may not sound right.
*
There are tactile dots. Use them to help with
1
button operations.
*
Functions which are marked  near the buttons
2
are activated if you press them. Likewise
functions marked
near the buttons, are
activated if you press and hold them.
Rear
 HOLD switch
You can protect the player against accidental
operation by using the HOLD switch when
carrying it.
By rotating the HOLD switch in the direction
of the arrow (  ), all the buttons are
inoperable. If you press buttons while the
HOLD function is activated, "HOLD" and
the current time appears in the display. (The
current time appears only when the clock is
set (  page 41).)
If you rotate the HOLD switch to the
opposite position, the HOLD function is
released.
 RESET button (  page 43)
Resets the player when you press the RESET
button with a small pin, etc.
When you turn on the player after resetting
it, the player activates resuming the previous
setting items.
 Strap hole
This is used to attach a strap (sold
separately).
 USB cap
Remove the USB cap and insert the USB
connector of the player to a USB port on your
computer.
To remove the USB cap
Remove the USB cap as shown below.
USB connector


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents