Depth Offset (Advanced); Aux. Temp. Offset (Advanced) - Humminbird 700 Seris Operation Manual

Depth Offset will adjust the digital depth readout to indicate depth from the
waterline or boat's keel. Enter a positive vertical measurement from the
transducer to the waterline to read the depth from the waterline. Enter a
negative vertical measurement from the transducer to keel to read the depth
from the keel. This menu option is available when the User Mode is set to
Advanced (see Main Menu: User Mode).
To change the Depth Offset setting:
1. Make sure the User Mode is set to Advanced, then highlight Depth
Offset on the Setup main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Depth Offset
setting. (-10.0 to +10.0 feet or -3 to 3 meters [International Models
only], Default = 0)
Aux. Temp. Offset will adjust the aux. temperature readout (the temperature on
the optional-purchase temperature probe or Temp/Speed accessory) by the
amount entered. This menu option is available when the User Mode is set to
Advanced (see Main Menu: User Mode).
To change the Aux. Temp. Offset setting:
1. Make sure the User Mode is set to Advanced, then highlight Aux.
Temp. Offset on the Setup main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Aux. Temp. Offset
setting. (-10.0 to +10.0 degrees, Default = 0)
Setup Menu Tab
Depth Offset
(Advanced)
Aux. Temp. Offset
(Advanced)
76