Main Unit
Front
Rear
1 Lens
2 Remote sensors
3 POWER lamp
4 STANDBY lamp
For detailed information on LED status of the POWER
lamp and STANDBY lamp, see "LED Status" on page 37.
Locations of Controls
Bottom
5 DC IN 12V connector
6 SYSTEM SELECT switch
This switch allows you to select the video format of the
signal to be output from the HD OUT COMPONENT, HD
OUT HD-SDI, SD OUT VIDEO and SD OUT S VIDEO
connectors.
Notes
• Be sure to set this switch before you turn on the power of
the camera. You can also set this switch in the standby
mode of the camera. After completing the setting, turn on
Locations of Controls
(Continued)
5