Leds - Fujitsu BroadOne LS110 Residential Femtocell User Manual

User Guide

LEDs

7
LEDs
Attention: Once the product has been
powered up and configured, all LEDs
should be a steady (not blinking) green.
If any LED is not steady green, refer to
Troubleshooting.
BroadOne LS110 Residential
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
ACTIVE LED Off — Power off or product failure
Steady Green — Activation complete/normal operation
Blinking Green — Activation in progress
Steady Orange — Product alarm
Blinking Orange — Product alarm during activation
WAN LED Off — Power off or WAN link (Ethernet connection) down
Steady Green — Internet connection normal
Fast Blinking Green — Files downloading
Slow Blinking Green — NTP access error
Steady Orange — Link error
Fast Blinking Orange — Link error while downloading files
Slow Blinking Orange — Link error (NTP access error)
LTE LED Off — Power off or LTE signal off
Steady Green — LTE signal on/normal operation
Fast Blinking Green — RF validation in progress
Slow Blinking Green — NTP calibration error during
synchronization
Fast Blinking Orange — Temperature alarm
GPS LED Off — Power off or hardware problem
Steady Green — GPS measurement completed/normal
operation
Fast Blinking Green — GPS measurement incomplete or in
progress
Fujitsu and Fujitsu Customer Use Only
Page 13