Ports And Reset Button - Fujitsu BroadOne LS110 Residential Femtocell User Manual

User Guide

Ports and Reset Button

6
Ports and Reset Button
BroadOne LS110 Residential
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
GPS port
If the internal GPS antenna is unable to receive a GPS signal, plug
the supplied GPS antenna into this port, and place the antenna
end of the cable near a window or other suitable location.
LAN port
To change settings, such as when setting up the product for the
first time, connect your PC to this port using a LAN cable. Once the
product is up and running, you may disconnect the LAN cable. If
your PC does not support Wi-Fi, you can leave it connected.
WAN port
Connect one end of a LAN cable to this port and the other end to
the LAN port on your router, modem, or other device used to
connect to the Internet.
Power port
Connect the supplied AC adapter to this connector. The product
does not include a Power or On/Off button. Connecting the power
cable automatically turns on the product.
Reset button
The Reset button is recessed on the back of the product and is
used to reset or restart the product:
• To reset (reinitialize) the product to factory-default settings,
press and hold the Reset button for 10 seconds. Caution: Your
settings will be lost! For more information, refer to
Product.
• To restart the product without losing your settings, just press
the Reset button. The product will restart.
Fujitsu and Fujitsu Customer Use Only
Page 12
Reset the