Dell P116G Service Manual page 61

Table 6. System setup options—System Configuration menu (continued)
System Configuration
Keyboard Backlight Timeout on Battery
Table 7. System setup options—Video menu
Video
LCD Brightness
Brightness on battery power
Brightness on AC power
Table 8. System setup options—Security menu
Security
Enable Admin Setup Lockout
Password Bypass
Enable Non-Admin Password Changes
Non-Admin Setup Changes
Allow Wireless Switch Changes
Enable UEFI Capsule Firmware Updates
Absolute
SMM Security Mitigation
Enable Strong Passwords
Intel Platform Trust Technology On
PPI Bypass for Clear Commands
Default: 10 seconds
Configures the timeout value for the keyboard when the computer is running
on battery. The keyboard backlight timeout value is only effect when the
backlight is enabled.
Default: 10 seconds
Sets the screen brightness when the computer is running on battery power.
Sets the screen brightness when the computer is running on AC power.
Enables or disables the user from entering BIOS Setup when an Admin
Password is set.
Default: OFF
Bypass the System (Boot) Password and the internal hard drive password
prompts during a system restart (only for computers shipped with hard drive).
Default: Disabled
Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON
Enables or disables changes to the setup option when an Administrator
password is set.
Default: OFF.
Enables or disables BIOS updates through UEFI capsule update packages.
Enables, disables, or permanently disables the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
Default: Enable Absolute
Enables or disables additional UEFI SMM Security Mitigation protections.
Default: OFF
NOTE: This feature may cause compatibility issues or loss of functionality
with some legacy tools and applications.
Enables or disables strong passwords.
Default: OFF
Enables or disables Platform Trust Technology (PTT) visibility to the operating
system.
Default: ON
Enables or disables the operating system to skip BIOS Physical Presence
Interface (PPI) user prompts when issuing the Clear command.
System setup 61