Toshiba RAV-GM561UT-E Service Manual page 94

No. Part name
Fan motor 2) Fix the fan motor lead, TC sensor and TCJ sensor with
(Continued) the clamp of the bell mouth.
3) Mount the wire box assembly with the fixing screw.
(DIA 4 × 10, 1 pcs)
4) Mount the electric parts box with the fixing screws B
and C.
(B : DIA 4 × 10, 3 pcs, C : DIA 4 × 8, 1 pcs)
5) Connect the connector removed in item 1 as before
and then fix wiring with the clamp.
6) Mount the cover plate with the fixing screw A
(DIA 4 × 10, 2 pcs)
7) Following to work of item 2 of
parts box cover and the suction grille as before.
NOTE :
When replacing the fan motor, be sure to attach the
removed clamp filter to the original position.
(RAV-GM56* : 1 pcs, RAV-GM80* to GM140 : 2 pcs)
Procedure
, mount the electric
– 94 –
Remarks
Fan motor
Motor lead
holding bracket
M6 nut
Wire box
Fixing
screw A
Cover
plate
Clamp
Heat exchanger
Fan motor lead
Heat exchanger
fixing board
Fixing screw
(Ø4×8)
Turbo fan