Electrolux EW7F1482BI User Manual page 33

Table of Contents

Advertisement

When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Départ/Pause
to pause the appliance. The related
indicator flashes.
2. Touch the Départ Différé button
repeatedly until the display shows
and the indicator
3. Touch the Départ/Pause
again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Départ/Pause
to pause the appliance. The related
indicator flashes.
2. Touch the Départ Différé button
repeatedly until the display shows the
desired delay time.
3. Touch the Départ/Pause
again to start the new countdown.
11.8 The SensiCare System
load detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Départ/Pause
button, the SensiCare System starts the
laundry load detection:
1. The appliance detects the load in the
first 30 seconds. In the programmes
where Time Manager is available,
during this phase dot separating
hours from minutes is blinking and
the drum rotates shortly.
2. The programme duration could be
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
button
goes off.
button
button
button
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The SensiCare detection is
carried out with complete
washing programmes only
and if the programme
duration has not been
reduced.
The SensiCare System is
not available with all
programmes such as :Laine/
Soie, Rinçage, Essorage
and programmes with short
cycles.
11.9 Interrupting a programme
and changing the options
When the programme is running, you
can change only some options:
1. Touch the Départ/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Départ/Pause
again.
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button Marche/Arrêt to
cancel the programme and to
deactivate the appliance.
2. Press the button Marche/Arrêt again
to activate the appliance.
ENGLISH
33
button.

Advertisement

Table of Contents
loading

Table of Contents