Table of Contents
Advertisement
en Additional functions
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡ The front panels of the housing are
temporarily heated slightly. This
prevents condensation in the area
of the door seal.
¡ When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
¡ The temperature in the appliance
varies due to the following condi-
tions:
– How often the appliance is
opened
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
Disconnect the appliance from the
▶
power supply. Unplug the appli-
ance from the mains or switch off
the circuit breaker in the fuse box.
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
To reduce the temperature, turn
1.
the temperature controller in the
direction.
Select a very cold setting only tem-
porarily; if the door is opened fre-
quently or before placing large
quantities of food in the refrigerator
compartment.
To increase the temperature, turn
2.
the temperature controller in the
direction.
16
Note: At a room temperature above
32 °C, slightly reduce the temperat-
ure setting in the appliance.
At a room temperature below 16 °C,
slightly increase the temperature set-
ting in the appliance.
Setting the freezer compartment
temperature
Press
repeatedly until the tem-
▶
perature display shows the re-
quired temperature.
The recommended temperature in
the freezer compartment is
−18 °C.
8 Additional functions
Find out which additional functions
can be used for your appliance.
8.1 Super freezing
With Super freezing, the freezer com-
partment cools as cold as possible.
Switch on Super freezing four to
six hours before placing food weigh-
ing 2 kg or more into the freezer
compartment.
In order to utilise the freezer capacity,
use Super freezing.
→ "Prerequisites for freezing capa-
city", Page 18
Advertisement
Table of Contents
