ASROCK E3C236D2I User Manual page 30

Serial ATA3 Connectors
(SATA_0)
(see p.6, No. 13)
(SATA_1)
(see p.6, No. 14)
(SATA_2)
(see p.6, No. 16)
(SATA_3)
(see p.6, No. 15)
(SATA_4)
(see p.6, No. 17)
(SATA_5)
(see p.6, No. 18)
E3C236D2I:
USB 3.0 Connector
E3C232D2I:
USB 2.0 Connector
(USB3_7)
(see p.6, No. 12)
USB 3.0 Header
(19-pin USB3_5_6)
(see p.6, No. 22)
Chassis Speaker Header
(4-pin SPEAKER1)
(see p.6, No. 19)
24
SATA_0 SATA_1 SATA_2
SATA_4
SAT A_5
IntA_P_D +
IntA_P_D -
GN D
IntA_P_SSTX+
IntA_P_SSTX-
GN D
IntA_P_SSRX +
IntA_P_SSRX -
Vbu s
Vbu s
IntA_P_SSRX -
IntA_P_SSRX +
GN D
IntA_P_SSTX-
IntA_P_SSTX+
GN D
IntA_P_D -
IntA_P_D +
1
+5V
DUMMY
DUMMY
SPEAKER
These SATA3 connectors
SATA_3
support SATA data cables for
internal storage devices with
up to 6.0 Gb/s data transfer
rate.
*The M.2 slot (M2_1) is shared with
the SATA_0 connector. When M2_1 is
populated with a M.2 SATA3 module,
SATA_0 is disabled.
ID
Besides four default USB 3.0
ports on the I/O panel, there
is one USB 3.0 header on this
mot herboard. This USB 3.0
header can support two USB
1
3.0 ports.
Please connect the chassis
speaker to this header.