Table of Contents
Advertisement
Hardware Monitor
Temperature
Fan
Voltage
Support OS
OS
Environment
Temperature
NOTE: Please refer to our website for the latest specifications.
This motherboard supports Wake from on Board LAN. To use this function, please make
sure that the "Wake on Magic Packet from power off state" is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the "PCI Devices Power On" is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. After that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certification tests. If you install the drivers only, it
will pass the WHQL tests.
4
- CPU/PCH Temperature Sensing
-MB/Card Side/TR1 Temperature Sensing
- CPU/Rear/Front Fan Tachometer
-CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
-CPU/Rear/Front Fan Multi-Speed Control
Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore, VCCSA,
VCCM, V1.0M, VCCIO, VCCST_SFR, VPPM, +BAT, 3VSB,
ATX+5VSB
Microsoft® Windows®
- Server 2008 R2 (64 bit)
- Server 2012 (64 bit)
- Server 2012 R2 (64 bit)
- Server 2016 (64 bit)
Linux®
- RedHat Enterprise Linux Server 6.6 (64 bit) / 7.0 (64 bit)
- SUSE Enterprise Linux Server 11 SP3 (64 bit) / 12.0 (64 bit)
- Ubuntu 15.04 (64 bit) / 15.10 (64 bit)
* Please refer to our website for the latest OS support list.
Operation temperature: 10°C ~ 35°C / Non operation
temperature: -40°C ~ 70°C
Advertisement
Table of Contents
