MSI K9N SLI V2 Series Manual page 35

2. After the hardware installation is completed, restart the system and install the NV
SLI driver/utility. A configuration panel will be provided for Multi-GPU control.
Check the Enable multi-GPU box to enable the SLI function for the onboard
graphics cards (concerning the details of multi-GPU settings, please refer to your
graphics card manual) .
Check the box
3. Restart your system and a pop-up message will show in the system tray confirm-
ing the M ulti-GPU has been enabled.
Important
If you want to remove one graphics card and quit the SLI function, make sure
the "MultiGPU" function is disabled.
Hardware Setup
2-21