Program The Process Input - Honeywell VERSAFLOW SONIC 1000/TWS 9000 Handbook

INSTALLATION
3

3.11.2 Program the process input

• Go to menu C1.10 via "Setup
Δ process input
C1.10
standard
flow mode flow mode flow mode flow mode
cold
or
Δ process input
C1.10
standard
flow mode flow mode flow mode flow mode
heat heat
heat heat
• Choose "Heat" or "Cold" to activate energy measurement.
Δ process input
C1.14
A: supply B: return
current inputs current inputs current inputs current inputs
A: supply B: return A: supply B: return
A: supply B: return A: supply B: return
• Choose in "current inputs
INFORMATION!
In case the function is "Heating", the temperature at the "supply" side is the highest.
In case the function is "Cooling", the temperature at the "supply" side is the lowest.
52
Process input flow mode
" which sensor is located at the supply side of the process.
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
"
34-VF-25-07 iss.2 GLO Nov 11 US