Rear View - Sharp PG-D3750W Operation Manual

Z
Numbers in refer to the main pages in this operation manual where the
topic is explained.

Rear View

Terminals
MONITOR OUT terminal
(Output terminal for computer
RGB and component signals.
Shared for COMPUTER/
COMPONENT1 and 2)
Terminal for connecting a monitor.
COMPUTER/COMPONENT1 and 2
input terminals
Terminals for computer RGB and
component signals.
HDMI terminal
21
Terminal for
22
HDMI input.
23
AUDIO 1 input
23
terminal
AUDIO OUT
23
terminal
Audio output terminal of equipment
connected to the audio input terminal.
AC socket
25
Connect the
supplied power cord.
Speaker
46
Carrying handle
Remote control
15
sensor
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington
MicroSaver Security System. Refer to the information that came with the system for
instructions on how to use it to secure the projector.
23
21
22
Using the Carrying Handle
When transporting the projector, carry it by the carrying handle on the
side.
• Always close the lens shutter to prevent damage to the lens when
transporting the projector.
• Do not lift or carry the projector by the lens as this may damage the
lens.
22
VIDEO input terminal
Terminal for connecting
video equipment.
22
S-VIDEO input terminal
Terminal for connecting video
equipment with an
S-video terminal.
23
AUDIO 2 input terminal
25
LAN terminal
Terminal for controlling
the projector using a
computer via network.
34
USB terminal
Terminal
connecting with
the USB terminal
on the computer
for using the
supplied remote
control as the
computer mouse.
23
RS-232C terminal
Terminal for controlling the
projector using a computer.
46 Speaker
Security bar
Kensington Security
Standard connector
13