Rear View; Terminals - Sharp XV-Z3000 Service Manual

XV-Z3000
DT-500

Rear View

Intake vent
AC socket
Connect the
supplied Power cord.
ear adjustment
foot
erminals
6 5
Terminal
INPUT 1, 2 terminal
1
Connecting video equipment with component output terminal (DVD
player, DTV decoder, DVD recorder with hard disc, etc.).
INPUT 3 terminal
2
Connecting video equipment with S-video output terminal (VCR, DVD
player, etc.).
INPUT 4 terminal
3
Connecting video equipment without S-video output terminal.
INPUT 5 terminal
■ Connecting video equipment with component output terminal
4
(DVD player, DTV decoder, DVD recorder with hard disc, etc.).
■ Connecting the computer.
INPUT 6 terminal
5
Connecting video equipment with HDMI output terminal.
S-232C terminal
6
Connecting the computer to control the projector.
T IGGE terminal (only XV-Z3000U/E/K)
When the projector is turned on, a control signal (DC 12V) outputs from this
7
terminal. If an electric screen or other compatible device is connected, it
can be turned on when the projector is turned on.
4 1
Description
10
Exhaust vent
emote control
sensor (rear)
Kensington
Security Standard
connector
2 3 7